Vehicle for technical operation on base chassis GAZ – Производство специальных автомобилей в Нижнем Новгороде

Product name and completions

Onboard truck GAZ 33086, 4*4, diesel, YaMZ 534

front - single- tyre,
rear - double-tyre

Production of the multipurpose platform with sliding and folding designs on the left and right board 3600х2340х600/800, increased lowere rear overhang. availability

Production of two boxes opening sideways at the left 600х1200х2 with lighting for steering of pneumopumps and storage of tool and equipment availability

Production of two opening boxes on the right 600х1200х2 with lighting for steering of washing of high pressure and storage of the tool and the equipment availability

Production of three subplatform boxes on the left and right boards for storage of tool and equipment, sliding engine support with vice(150 mm.) and anvil availability

Production of two ladders for access in superstructure

Production of folding ladder on the right side for possibility of service of capacities

Installation of power take-off device for drive gear of the compressor and car wash

The K-24M compressor or analog with receiver of 50 l. established in the central part of the platform

The pump of high pressure with gun disperser, capacity for water 500-700l., tank filler and drain valve

The pump of delivery of oil with the crane-counter and the coil with automatic reeling 'Pressol'

Capacity for oil, 200 l., multiple-purpose

Capacity for the fulfilled oil, multiple-purpose, 200 l.

The AE&T T62103A crane with hydraulic actuator and hummock winch, l/c up to 900 kg for removal - installation of capacities, with capture for barrels

The welding generator with electric starter, the generator 220B - 2.5 kW, welding current to 190A, tank, 19 l., petrol, special models SS-190E4 or analog

Grinder SP 2014 or analog

Screwdriver, pneumatic, IP-3127 or analog

Drill, pneumatic, IP-1010R or analog

Nozzle for blowdown

Hose multiple-purpose for the pneumotool with sockets of bayonet type

15 m.

Set of entrenching tool with fastening

Set of capacities for collecting technical liquids pan, buckets)

Capacity for washing

of hands, 20 l., rolling out 1

Set of tool for repair (2 sets of heads 6-50, set of boring bits 3-13, set of wrenches 6-32, set of screw-drivers, remover, set of dipsticks, compressometer, set of pressure guns, box)

Documents of traffic police "The certificate on compliance of the CU with the changes made to its design to safety requirements", mark in Vehicle Certificate of Title "re-equipment of the car in special for maintenance operation" availability

Распечатать характеристики