Bus for tourists

Base technical characteristics
-AWD( GAZ – 33088 Sadko)
Wheel formula 4x4
Single-tire wheels
Fuel type – diesel
ABS
Engine YAMZ-534 (euro 5, 148,9 HP.)
Transmission 5st.
Steering booster,
Automatical pumping of wheels
Fuel tank 105 liters
Spare wheel
Fuel tank 105 liters – 2pcs.
Daytime running lights
Winch on 4,5t, 50m.
Colour – orange
Tachograph
Van, low, 15 places
Van type – frame; kung with bevels.
Lowering of the van happens due to reduction of pro-rates between frame and floor of the van
Bevels on the van begin from windows
Dimensions – 3720х2250х1620 mm.;
External covering —plated metal, colour – orange;
Internal covering – decorative fibreboard, colour – gray / brown (light);
Warming – expanded polystyrene, 40 mm.;
Doors – side single, rear single;
The lock of side door without ledge,goes level with door;
Ladder –2 pieces.
Windows -6 pieces: 3 sliding (1 on right and 2 on left), 3 deaf; (we lower them on 20 sm) windows have to be long (about a meter)
Window in front wall
Windows in doors
Lighting – 4 ceiling plafonds
Floor – plywood, 21 mm., transport linoleum,
Seats medium, fabric (velour of gray colour) – 15 pieces;
Seat belts – Three-point;
Heater Planar 4D-24; with powering from fuel tank
Buzzer (button of call of the driver);
Intercom
Holder of spare wheel (on rear wall of the van) ON THE RIGHT
Rear door is located on rear wall;
Number board with illumination behind on the van
GENERAL HEIGHT of the CAR ~2, 88 m
Van height from cabin ~ 30sm!
Partition in the van is necessary to put backpacks
Emergency hatch in roof of the van - at the level of roof (does not stick out)
On the van there are arches for wheels
Mudguards – conveyor tape

The process of ordering machinery

1
Consultation on the car and equipment
2
Conference call with the Customer
3
Individual discount available
4
Conclusion of an agreement (contract)
5
Reconcile the 3D model with the design department
6
Start the production cycle
7
Readiness alert
8
Shipment date negotiation
9
Delivery
Services